Hydraulic presses for lamination of wooden stock Rotor
Designed for window profiled parts, supporting profiled parts, thicker boards, etc. The glued joints are dried naturally.
The feeding of the press is performed manually. Two movable bearings of the machine casing carry the four-side rotor, driven by toothed cam device with chain transmitter.
Pressing is carried out by hydraulic cylinders. Aligning is carried out by aligning units. Each aligning unit has 1 hydraulic cylinder. Aligning cylinders can be on the outer side of the rotor or in the interior of the rotor with counter stops on the outer side. Steering is done by manual hydraulic valves or electrical controls.
Description
| Operating length | 3000 – 6000 mm |
| Operating height | 1000 – 1200 mm |
| Operating thickness | 100 – 200 mm |
| Number of working sides | 4 |
| Number of pressing cylinders | 6 – 12 |
| Number of straightening cylinders | 3 – 12 |
| Specific pressure | 6 – 11 kg/cm2 |
| Working pressure (max.) | 160 bar |
Video guide
