SHRINK WRAP PACKAGING MACHINE SFV900
This type is a machine with one foil unreeling device. The new Shrink Foil Packing Machine type SFV900 is a further development of the approved Shrink Foil Packing Machine. With extremely short intervals the package runs through the machine. The driven cross welding uses this gap to weld and cut the package, which is inside the film tube. Because of the extremely small gaps between the products a high cycle rate is reached and a relatively low throughput speed is required. A high performance and a compact construction, especially for product length of 1.300 mm, feature this high-performance machine.
Description
| SVF800 | SVF1000 | 800CONT | SFV900 | |
|---|---|---|---|---|
| Lenght min. | 1200 mm (450mm) | 1300 mm (650 mm) | 1500 mm | 1500 mm |
| Width max. | 280 mm (400 mm) | |||
| Height max. | 180 mm | |||
| Type of foil | Dual-axis polyethylene fine shrink film (perforated) | |||
| Foil thickness | 25 – 80 µ | 25 – 80 µ | 25 – 80 µ | 40 µ |
| Running speed | Type N 30 m/min. Type M 40 m/min. Type H 60 m/min. |
Type N 30 m/min. Type M 40 m/min. Type H 60 m/min. |
max. 60 m/min | max. 60 m/min |
| Effective bundle output per minute Reference length 1800 mm* |
Type N : 8 Bundle/min Type M : 10 Bundle/min Type H : 13 Bundle/min |
Type N : 8 Bundle/min Type M : 10 Bundle/min Type H : 13 Bundle/min |
ca. 22 Bundle/min | |
| Maximum power consumption of the shrink tunnel |
Type N : 18 kW Type M : 24 kW Type H : 36 kW |
Type N : 18 kW Type M : 24 kW Type H : 36 kW |
max. 45kW | |
* – These data are assumptions and can differentiate depending on surrounding temperature and type of foil. A final benefit promise may be given only after the test with the original foil.
